View source for Capuchin Administration

rePro has a built in web server for configration and adminstration.
The default port for the rePro administration web interface is on port 5080.
To configure rePro point your web broser to http://repro-host-address:5080
The default adminstator credentials for the web interface are:
  user-id: admin
  password: admin

=== Minimal Initial rePro Proxy Configuration ===
* Define a domain
From the main rePro administration web page click on the CONFIGURE -> DOMAINS link
on the left side of the page.  Enter the fully qualified host name for the host
upon which rePro is running or the cannonical domain for which rePro will handle
SIP requests into the empty field to the right of the <b>New Domain:</b> label
and click the <b>Add</b> button.
Example:
   <b>New Domain:</b>example.com

* Add at least one user
Click on the USERS -> ADD USER link on the left hand side of the rePro configuration web page.
Fill in the user information for a user information. Minimally enter the <b>User Name</b>,
select the <b>Domain</b> (if more than one is configured) and enter a <b>Password</b>.
Example:
   <b>User Name:</b>alicedoe
   <b>Domain:</b>example.com
   <b>Password:</b>1234
   <b>Full Name:</b>Alice Doe
   <b>Email:</b>alicedoe@example.com

=== Configure and Register a SIP User Agent ===
Configure a SIP user agent (softphone or appliance) with the same user information
entered for the user in the rePro configuration interface.  The address of record (AOR)
for the user will be sip:user-name@repro-domain where the user-name part is the value 
entered on in the <b>User Name</b> field on the USERS -> ADD USER page.  The
repro-domain part is the valued entered on the CONFIGURE -> DOMAINS page.  Note: you can also
see the users' AORs listed on the USERS -> SHOW USERS page.  The authentication
user id that is expected by rePro is the user-name part of the AOR (no @ or domain name).
The parameters for your specific user agent may be labeled differently but typically the
following information is required:
 * User Address of Record
 * Proxy
 * User Authorization Id
 * User Password

The values for these parameters assuming the above examples for domain and user 
would be as follows:
 <b>User Address of Record:</b> sip:alicedoe@example.com
 <b>Proxy:</b> example.com
 <b>User Authorization Id:</b> alicedoe
 <b>User Password:</b> 1234